• Cold air induction system (any brand)
• Cat-back exhaust system (any brand)
• Premium fuel (91 octane or higher is required)
• If you have more aggressive modifications (such as a camshaft) done to your vehicle, please consult with us prior to purchasing this product

NOTE: This vehicle requires a Security Relearn Procedure for proper installation. See below for instructions.

FEATURES:

• Speed limiter removed
• 3-1 and 4-2 skip shifts
• Transmission line pressure increased
• Shift points moved (5800-6000rpms)
• Fan turn on points altered as follows:
  • 186 degree F Turn On
• Fuel/spark adjustments as follows:
  • Enrichens fuel delivery for critical problem areas
  • Provides a consistent power gain across the entire power band
  • Reduces spark retard (knock retard)
• Dynamometer testing has shown up to an 6 to 10 HP gain in 60 degree temperatures on a development vehicle using 93 octane fuel.

  Digital Horsepower now offers a STANDARD FREE service called Flash Guard. This provides for one re-flash to your PCM with the code purchased in the event of code overwrite (i.e. the dealer accidentally flashes your PCM with factory code). The unit returned to DHP must be the same unit we sold you and must be accompanied by all of the items listed below. Failure to meet all of the requirements will result in them returning your unit and you will also incur shipping charges both ways. You must provide:

  1. Digital Horsepower Inc. inventory sticker
  2. Copy of your purchase receipt from PFYC.com
  3. Full name, address, phone number of original purchaser

READ BEFORE ORDERING
Please note in order to insure compatibility, you or your mechanic should write down the "SERV" number from the factory PCM (under the drivers dash) then enter the SERV number when ordering. See image below:

NOTE: This product is an electrical item and is thus not returnable. Please choose your selections carefully.

REFUNDABLE CORE INFORMATION:

• A core charge will be added to the price of this item. The core charge is 100% refundable with the return of your original PCM within 14 days of receiving your DHP PCM. If your core is not returned within 14 days, your refunded core charge is forfeited. Click here for a printable form to fill out when returning your core. All information MUST be filled out, and all required paperwork MUST be in the returned package. Your core MUST be shipped via UPS or FedEx ONLY, and must have a "No Signature Required" release on it to avoid delays in your refund. Once your core is received, a check will be issued within seven business days.
• You also have the option of keeping your core, and in this case, we will keep the core charge.

ABOUT CASE LEARN:
It is advisable to make a trip to the dealer and instruct them you have a DTC P1336 which calls for a CASE learn. Some may refer to it as a Crank Positioning. Use some degree of discretion while asking them *NOT* to reflash the PCM. If they reflash the PCM, all your tweaks are gone forever. It's a simple process that should take no more than 5 minutes. Most dealers do not have a problem with it. Many do it for free while other may charge a modest fee for it.

SECURITY RELEARN PROCEDURE

In the event that your vehicle fails to start after installing the DHP 1.0 PCM, you will need to perform the Security Relearn Procedure. This procedure allows the PCM to function properly in your vehicle. Follow the steps listed below completely.

1. Attempt to start the car by turning the key to the Start/Run Position.
2. Observe that the vehicle fails to start and that the security light is illuminated.
3. Release key to the 'ON/Accessory' Position. (DO NOT turn key to the 'off' position.)
4. Allow the vehicle to sit with the key in the 'ON/Accessory' Position for no less than 11 minutes.
5. Turn key to off position and allow the vehicle to remain in the 'OFF' position for no less than 30 seconds.
6. Repeat #1 - #5 for 3 cycles.
7. On 4th attempt, car should start.

NOTE : Since this is a fairly long procedure, I would limit all electrical sources, such as disconnecting headlights, to prevent discharge of battery.

NOTE 2 : It is SAFE to wait LONGER than the allotted time, but it is not safe to wait less time. I.e. 12 minutes instead of 11 minutes should be safe; however, waiting 10 minutes instead of 11 minutes is not safe.

Properly executed, this procedure should take approximately 35 minutes to complete.