|
Are you tired of a tube and a filter being labeled as a cold air intake? Here's a breath of fresh air for you and your HEMI! Our intake starts with a custom molded air box that really fits your car - not something that was cobbled together in a garage. Two anodized aluminum brackets mount the box at stock mounting points. We use a huge S&B filter with a 6 inch mounting flange that clamps to our molded coupler. The coupler fastens to the air box via molded-in inserts and 6 SS machine screws. On the engine side of the air box, the coupler transitions to a 5 inch outer diameter and accepts our high gloss silicone 5" hump hose. The inlet tube features a 5 inch mounting flange which couples to the hump hose, then tapers to 3 1/2 inches over its length. Our unique design creates a barrier to keep hot engine compartment and radiator air from entering your filter. Additionally, the cool air increases in velocity as it flows through our tapered air tube. The result is more power and better efficiency. Choose from the standard plastic elbow or the carbon fiber pattern (shown in the photos above) using the selection box below. From start to finish, we've striven to build an air intake system that will exceed your expectations. Adds HP and torque!
APPLICATIONS:
2005-2008 Chrysler 300C, SRT8
2005-2008 Dodge Magnum R/T, SRT8
2006-2008 Dodge Charger R/T, SRT8
|
;)
){kind=spacer}
){kind=small}
