|
We are proud to offer the SD Grand Prix Ram Air Hood, exclusively from PFYC. In the tradition of the early 60's Super Duty Pontiacs that dominated the Grand National events of NASCAR and the Super Stock class on the dragstrips of America, we're proud to offer the SD Grand Prix Ram Air Hood. The SD Grand Prix Ram Air Hood for the 1997-2003 Pontiac Grand Prix is sure to turn heads. Our SD Grand Prix Ram Air Hood is built using the finest materials and craftsmanship available and boasts a weight savings of almost 25% (over 11 lbs) compared to the stock hood. Comes with inlet grills. Uses factory hood struts, hinges and latches. Smooth underside. PFYC is proud to offer this exceptional value to our customers. Comes unpainted, ready to prep and paint. Fully functional by adding the Cold Air Box by SLP available below in the Related Products section.
Q: Can you recommend a body shop in my area to have the hood prepped and painted? A: While we don't have a database of body shops around the country, we can give you some hints on finding the right place to do the work. Look for a shop that has experience with fiberglass and has worked with aftermarket hoods. Rarely will you find that your local dealership has had any experience with fiberglass, they usually work with factory parts made of steel. Some of our customers have had success contacting their local Chevrolet dealer's body shop and asking where they send Corvettes that come in damaged as Corvettes are fiberglass. Your local performance shop may also have recommendations. Ask for recommendations of other customers who have had similar work done.
Q: What all is involved with "prep" and painting as listed in the description above? A: Your body shop will want to test fit the hood immediately upon receiving it. They will make any adjustments necessary to make it fit just right. They will also want to block sand it prior to painting. This is where a good body shop is important. If they don't have experience with fiberglass, they can cost you money. There should be a couple of hours of labor involved with test fitting and prepping (painting will be extra). If they want to charge you for much more than that or they are telling you the hood will need repair before they can paint it, tell them to hold off and email us for further instructions.
Q: Can I buy a functional airbox? A: We do not offer a specific airbox that mates up with the hood, but you will gain the same performance by adding our K&N FIPK intake to your car, and it will sit below the hood scoop air output to grab the incoming air.
Application: 1997-2003 Grand Prix SE/GT/GTP ONLY
| Additional terms of sale for this product
Shipping is freight collect (you pay shipping on receipt of product). Sample shipping costs are for example only and are to business addresses only. Residential addresses will cost additional (at least $70 additional or more). Southeast about $160-$190. Northeast about $160-$190. Midwest $140-$180 West Coast $100-$155. Hawaii $250 or more. Toronto Canada $195-$260. If you live more than 20 miles outside of a major metropolitan area, shipping charges may be more. For a more accurate quote, feel free to email us.
Please check the product for damage carefully prior to accepting the package from the delivery service. If anything is damaged, REFUSE delivery and alert us immediately. IF THE PACKAGE IS SIGNED FOR AND DAMAGED IS FOUND AFTER IT HAS BEEN SIGNED FOR, YOU HAVE WAIVED ALL RIGHTS TO DAMAGE CLAIMS.
Test fit parts immediately. All parts have been inspected and test fit prior to shipment. If your body shop can not get the part to fit correctly, contact us immediately. Photos of any fit problems must be emailed to us for evaluation. Include the body shop's phone number so we may offer technical support to the body shop if necessary. We may require you to have a different body shop install the parts at our discretion if we feel a second opinion is needed. Any claims for fit problems must be brought to our attention within 3 business days of receiving the part.
Any claims for defects in fit or finish made after prep work has started on the part will not be honored. This means if your shop takes it upon themselves to fix any issues without our prior approval, we will not reimburse for any related expenses nor will the manufacturer honor any defect or fitment claims so make sure test fitting is done prior to any work being started.
Part warranty is 1 year from date of purchase against manufacturer's defects or workmanship. Warranty is for part replacement only.
These terms are in addition to the terms of use, return policy and other policies posted on our website. |
|
|
;)
;)
;)
;)
