- Free shipping
- 11% less
Subtotal:$0.00
A set of four jacking pucks that snap into the factory lift points on C7 and C8 Corvettes and stay there between lifts. They install in about five minutes with no drilling or adhesive.
Installing these pucks takes about five minutes, and after that you never have to dig a loose puck out of the frunk before a tire rotation again. The set of four snaps into the factory lift points on a 2014-2019 C7 or a 2020-2026 C8, including the Stingray, Z06 and E-Ray. Once in place they give a floor jack, a lift arm or a portable lift a defined contact point, so the saddle meets the puck instead of the rocker or fascia. That protects the composite body panels from the cracks that a misplaced jack can cause.
Removable pucks work, but they have to be found, inserted and then remembered every time the car goes up, and they are easy to leave behind at a tire shop. Leave-in-place pucks stay locked into the lift points while you drive, so a technician who skips the pads still lifts on the right spot. They can be taken out later if you ever want the lift points bare.
Start by cleaning each lift point so the puck seats fully. Line the puck up with the slot in the frame and press it in until it snaps home, then repeat at the other three corners. No drilling, adhesives or special tools are required, and the full set weighs about a pound.
Yes, the set is listed for all 2020-2026 C8 models, including the Stingray, Z06 and E-Ray. It also fits every 2014-2019 C7.
They give a portable lift a stable contact point just as they do a floor jack. On cars with carbon fiber rockers, some owners add rubber blocks to the lift frame for extra clearance.
The pucks snap into the lift point slots and are designed to stay there during normal driving. If you ever need to remove them, they come out without damaging the lift points.
| Year | Make | Model | Notes |
|---|---|---|---|
| 2020 | Chevrolet | Corvette | |
| 2021 | Chevrolet | Corvette | |
| 2022 | Chevrolet | Corvette | |
| 2023 | Chevrolet | Corvette | |
| 2024 | Chevrolet | Corvette | |
| 2025 | Chevrolet | Corvette | |
| 2026 | Chevrolet | Corvette | |
| 2014 | Chevrolet | Corvette | |
| 2015 | Chevrolet | Corvette | |
| 2016 | Chevrolet | Corvette | |
| 2017 | Chevrolet | Corvette | |
| 2018 | Chevrolet | Corvette | |
| 2019 | Chevrolet | Corvette |
Shipping
We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of PFYC. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.
Sometimes a product needs to be returned. Our goal is to make this process as painless as possible. If you receive a product that is incorrect, damaged or inferior, please contact us immediately so we can begin the returns process and make sure you receive what you ordered quickly. For all returns, you must receive a Return Merchandise Authorization (RMA) number.
When you send back an item you no longer want, you have two choices for getting credit, assuming you properly followed all guidelines for returns:
You've Changed Your Mind
If you have ordered and received an item from PFYC.com that you no longer want, please follow the directions in the Returning Items section below. Please note that you are responsible for return shipping, and we will not reimburse you for the original shipping cost.
Incorrect or Damaged Product
If you have received damaged merchandise or have received items that you did not order, please contact us by replying to your e-mail receipt, making sure to copy the contents of the receipt in your e-mail. Simply let us know the error or that the product was damaged, and we'll take care of it at no cost to you, including all shipping charges (up to the original amount you paid for shipping). We will wait to receive and inspect the originally-shipped product prior to shipping a replacement. If a product was damaged during shipping, you must retain all materials until the shipper (UPS, FEDEX, etc.) has had a chance to inspect the package, if they choose. Our policy is to replace damaged or incorrect products. If you choose not to accept a replacement, it is considered a regular return and subject to our return policy guidelines listed above.
Replacement Product
If we sent you something in error, and we send the correct item out but do not get the wrong one back within 10 business days, we will charge your credit card for the full amount of the replacement item or the incorrect item plus shipping, whichever is greater.
Warranty Replacement
If you feel a product you have purchased is defective or has failed under warranty, contact us. We will help determine the likelihood it is defective prior to your returning the product for inspection. This will save you time and money if there happens to be another reason for the problem you are having with the product. Once a product has been determined it may be defective and requires further inspection, we will instruct you as to your next course of action. This next step may vary depending on the guidelines set forth by the manufacturer. Shipping costs for returning parts for inspection and returning the part to you are usually your responsibility depending on the manufacturer and what their warranty policy is. More information can be found in our Customer Service section under the Product Warranties section.
Follow the steps below to return items that you no longer want:
If you have any questions about our return policy, please contact us.