- Free shipping
Your cart is empty
Subtotal:$0.00
Tired of the dim lighting in your vehicle's stock speedometer? Got a light burned out? We have the best solution: LEDs! Upgrade your speedometer to virtually everlasting and very bright LEDs or just put them in and change the color of your stock dash. Please note before ordering: In some cases, these LEDs may not produce the expected amount of light output due to the gauge face itself. Changing the gauge face may be required to get a brighter light. For example a blue LED light will not light up through a red gauge face. We are not responsible for loss, damage, or injury relating to use of this product. Do it Yourself This can be an easy upgrade for your speedometer. Some are as easy as a twist in / twist out bulb swap. Replace your old bulbs with the latest LED technology and never replace them again. These LED are capable of lasting between 25,000 and 100,000 hours of use. Replace them once, then never again. Get the LED advantage Each of these have been specially designed to give the best color and lighting specific to speedometers. The manufacturer is an expert and OEM-quality manufacturer of speedometer faces and now bulbs. These LEDs have a higher light output, less energy consumption and operate 75% cooler than a traditional light bulb already installed in your dash. Get the best available! Technical Information Each new LED is ready to install: no additional modifications will be required to the LED or circuit board. You will need to remove the stock light bulb as shown in the install guide that will come with your kit. Some LEDs that are designed to mount to the board and will need to be soldered into it place. The manufacturer has designed step by step install guides to assist with the installation. A note regarding color changes: Changing the color of the LED may or may not give you the desired night color you are looking for. A change of the gauge face may be required. Kit Contents Kit A: 25 surface mount LEDs (requires soldering) Kit B: 6 twist in/out LEDs with 1/2 inch base (plug and play) Kit C: 4 twist in/out LEDs with 1/2 inch base and 2 with 3/8 inch base (plug and play) Kit D: 7 twist in/out LEDs with 3/8 inch base (plug and play) Kit E: 10 surface mount cube LEDs (requires soldering) Kit F: 25 surface mount LEDs (requires soldering) Color note: Red, blue, green, and white are generally in stock and ship within one business day of your order. Return policy: Unopened parts (i.e. tamper seal intact) are returnable per our returns policy, but opened parts, even if not installed, are not returnable under any circumstances. Please order carefully! PARTIAL APPLICATION LIST ( click here if your vehicle isn't listed) 97-04 Buick Regal: Kit B 03-12 Cadillac CTS, CTS-V: Kit A 2002 Cadillac Escalade: Kit B 03-06 Cadillac Escalade: Kit E 03-07 Chevy Avalanche incl 2500: Kit E 98-02 Chevy Camaro: Kit B 10-12 Chevy Camaro: Kit A 01-04 Chevy Cavalier: Kit E 05-10 Chevy Cobalt: Kit E 05-12 Chevy Corvette C6 all models: Kit A ( NOTE: very difficult installation) 11-12 Chevy Cruze: Kit F 06-11 Chevy HHR all models: Kit A 00-05 Chevy Impala: Kit E 06-14 Chevy Impala with 7000 RPM tach: Kit A 95-02 Chevy Suburban and Tahoe: Kit B 03-07 Chevy Suburban and Tahoe: Kit E 07-14 Chevy Suburban and Tahoe: Kit F 05-13 Ford Mustang all models: Kit A 98-02 Pontiac Firebird: Kit B 07-09 Pontiac G5: Kit E 08-09 Pontiac G8: Kit A 99-05 Pontiac Grand Am: Kit C 97-03 Pontiac Grand Prix: Kit B 04-08 Pontiac Grand Prix: Kit A 04-06 Pontiac GTO: Kit A 06-09 Pontiac Solstice: Kit E 07-09 Saturn Sky: Kit E
Tired of the dim lighting in your vehicle's stock speedometer? Got a light burned out? We have the best solution: LEDs! Upgrade your speedometer to virtually everlasting and very bright LEDs or just put them in and change the color of your stock dash.
Please note before ordering: In some cases, these LEDs may not produce the expected amount of light output due to the gauge face itself. Changing the gauge face may be required to get a brighter light. For example a blue LED light will not light up through a red gauge face. We are not responsible for loss, damage, or injury relating to use of this product.
Do it Yourself
This can be an easy upgrade for your speedometer. Some are as easy as a twist in / twist out bulb swap. Replace your old bulbs with the latest LED technology and never replace them again. These LED are capable of lasting between 25,000 and 100,000 hours of use. Replace them once, then never again.
Get the LED advantage
Each of these have been specially designed to give the best color and lighting specific to speedometers. The manufacturer is an expert and OEM-quality manufacturer of speedometer faces and now bulbs. These LEDs have a higher light output, less energy consumption and operate 75% cooler than a traditional light bulb already installed in your dash. Get the best available!
Technical Information
Each new LED is ready to install: no additional modifications will be required to the LED or circuit board. You will need to remove the stock light bulb as shown in the install guide that will come with your kit. Some LEDs that are designed to mount to the board and will need to be soldered into it place. The manufacturer has designed step by step install guides to assist with the installation. Tech support and installation service is also available.
A note regarding color changes: Changing the color of the LED may or may not give you the desired night color you are looking for. A change of the gauge face may be required.
Kit Contents
Color note: Red, blue, green, and white are generally in stock and ship within one business day of your order.
Return policy: Unopened parts (i.e. tamper seal intact) are returnable per our returns policy, but opened parts, even if not installed, are not returnable under any circumstances. Please order carefully!
PARTIAL APPLICATION LIST (click here if your vehicle isn't listed)
Shipping
We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of PFYC. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.
Sometimes a product needs to be returned. Our goal is to make this process as painless as possible. If you receive a product that is incorrect, damaged or inferior, please contact us immediately so we can begin the returns process and make sure you receive what you ordered quickly. For all returns, you must receive a Return Merchandise Authorization (RMA) number.
When you send back an item you no longer want, you have two choices for getting credit, assuming you properly followed all guidelines for returns:
You've Changed Your Mind
If you have ordered and received an item from PFYC.com that you no longer want, please follow the directions in the Returning Items section below. Please note that you are responsible for return shipping, and we will not reimburse you for the original shipping cost.
Incorrect or Damaged Product
If you have received damaged merchandise or have received items that you did not order, please contact us by replying to your e-mail receipt, making sure to copy the contents of the receipt in your e-mail. Simply let us know the error or that the product was damaged, and we'll take care of it at no cost to you, including all shipping charges (up to the original amount you paid for shipping). We will wait to receive and inspect the originally-shipped product prior to shipping a replacement. If a product was damaged during shipping, you must retain all materials until the shipper (UPS, FEDEX, etc.) has had a chance to inspect the package, if they choose. Our policy is to replace damaged or incorrect products. If you choose not to accept a replacement, it is considered a regular return and subject to our return policy guidelines listed above.
Replacement Product
If we sent you something in error, and we send the correct item out but do not get the wrong one back within 10 business days, we will charge your credit card for the full amount of the replacement item or the incorrect item plus shipping, whichever is greater.
Warranty Replacement
If you feel a product you have purchased is defective or has failed under warranty, contact us. We will help determine the likelihood it is defective prior to your returning the product for inspection. This will save you time and money if there happens to be another reason for the problem you are having with the product. Once a product has been determined it may be defective and requires further inspection, we will instruct you as to your next course of action. This next step may vary depending on the guidelines set forth by the manufacturer. Shipping costs for returning parts for inspection and returning the part to you are usually your responsibility depending on the manufacturer and what their warranty policy is. More information can be found in our Customer Service section under the Product Warranties section.
Follow the steps below to return items that you no longer want:
If you have any questions about our return policy, please contact us.