- Free shipping
- 11% less
Your cart is empty
Subtotal:$0.00
Imagine having the ability to turn your Corvette C7, C6 Z06, Grand Sport, ZR1, and NPP exhaust from MILD (exhaust ports closed) to WILD (exhaust ports open) using your OEM Homelink (found on your visor) or via the supplied remote. This revolutionary product lets you control your, 2006-Present Corvette Z06, ZR1, Grand Sport or NPP exhaust system on demand via a tiny wireless remote or the Homelink feature in your car . One of the coolest technologies on the new C6 Z06, ZR1, Grand Sport, and 2007+ NPP equiped Corvette is the “bi-mode” exhaust. Whisper quite up until 3500 RPM and then a wide open race car sound as the flaps located in the tips open. The problem is the inability to control this feature. Up until now, the owner’s only choice was to pull the fuse or to install wiring, drill a hole for a switch to turn the quiet mode off (and these sell for $85). After spending $75,000, the last thing I would want to do is start running wires and drilling holes. This patent pending product requires no drilling or running wires through your car. It’s a simple 5 min simple plug and play installation that anyone can do. Once installed, you will have full control over the exhaust mode, via a simple ON/OFF remote wireless controller or your Homelink transmitter (simple programming required, instructions provided. Please be aware that not all Corvettes use Homelink, some use Car2U. You will need to use the remotes if your car is equiped with Car2U). Once the Homelink is programmed, you can just use that to work your exhaust. You also will get two sleek ON/OFF wireless controls that can be mounted anywhere and will control the exhaust up to 50’ away. The “OFF” mode gives you that race car sound 100% of the time. The “ON” mode works as the stock setting and is quiet to preset OEM 3,500 RPM so the system will work just like the stock system . The switch can be used anytime the car is running, allowing you to show your friends what a cool exhaust you have as you can use the remote and open and close the flaps on demand. You will receive the professionally engineered plug and play wireless receiver, two miniature remotes (batteries included) and the necessary homelink programing instructions. Believe me you will be happy with the quality and fit of this Corvette exhaust controller. NOTE: this unit will work with either of the supplied remotes or the OEM visor mounted Homelink system. It will not work with other visor-mounted units. GM has been testing other visor units, so you may not have a Homelink system. If you have a visor unit with a single LED with the home symbol around it you have Homelink and this will work with the visor controls. If not, you will need to use the included remotes.
Imagine having the ability to turn your Corvette C7, C6 Z06, Grand Sport, ZR1, and NPP exhaust from MILD (exhaust ports closed) to WILD (exhaust ports open) using your OEM Homelink (found on your visor) or via the supplied remote.
This revolutionary product lets you control your, 2006-Present Corvette Z06, ZR1, Grand Sport or NPP exhaust system on demand via a tiny wireless remote or the Homelink feature in your car . One of the coolest technologies on the new C6 Z06, ZR1, Grand Sport, and 2007+ NPP equiped Corvette is the bi-mode' exhaust. Whisper quite up until 3500 RPM and then a wide open race car sound as the flaps located in the tips open. The problem is the inability to control this feature. Up until now, the owner's only choice was to pull the fuse or to install wiring, drill a hole for a switch to turn the quiet mode off (and these sell for $85). After spending $75,000, the last thing I would want to do is start running wires and drilling holes.
This patent pending product requires no drilling or running wires through your car. It's a simple 5 min simple plug and play installation that anyone can do. Once installed, you will have full control over the exhaust mode, via a simple ON/OFF remote wireless controller or your Homelink transmitter (simple programming required, instructions provided. Please be aware that not all Corvettes use Homelink, some use Car2U. You will need to use the remotes if your car is equiped with Car2U). Once the Homelink is programmed, you can just use that to work your exhaust. You also will get two sleek ON/OFF wireless controls that can be mounted anywhere and will control the exhaust up to 50' away. The OFF' mode gives you that race car sound 100% of the time. The ON' mode works as the stock setting and is quiet to preset OEM 3,500 RPM so the system will work just like the stock system . The switch can be used anytime the car is running, allowing you to show your friends what a cool exhaust you have as you can use the remote and open and close the flaps on demand.
You will receive the professionally engineered plug and play wireless receiver, two miniature remotes (batteries included) and the necessary homelink programing instructions. Believe me you will be happy with the quality and fit of this Corvette exhaust controller. NOTE: this unit will work with either of the supplied remotes or the OEM visor mounted Homelink system. It will not work with other visor-mounted units. GM has been testing other visor units, so you may not have a Homelink system. If you have a visor unit with a single LED with the home symbol around it you have Homelink and this will work with the visor controls. If not, you will need to use the included remotes.
Shipping
We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of PFYC. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.
Sometimes a product needs to be returned. Our goal is to make this process as painless as possible. If you receive a product that is incorrect, damaged or inferior, please contact us immediately so we can begin the returns process and make sure you receive what you ordered quickly. For all returns, you must receive a Return Merchandise Authorization (RMA) number.
When you send back an item you no longer want, you have two choices for getting credit, assuming you properly followed all guidelines for returns:
You've Changed Your Mind
If you have ordered and received an item from PFYC.com that you no longer want, please follow the directions in the Returning Items section below. Please note that you are responsible for return shipping, and we will not reimburse you for the original shipping cost.
Incorrect or Damaged Product
If you have received damaged merchandise or have received items that you did not order, please contact us by replying to your e-mail receipt, making sure to copy the contents of the receipt in your e-mail. Simply let us know the error or that the product was damaged, and we'll take care of it at no cost to you, including all shipping charges (up to the original amount you paid for shipping). We will wait to receive and inspect the originally-shipped product prior to shipping a replacement. If a product was damaged during shipping, you must retain all materials until the shipper (UPS, FEDEX, etc.) has had a chance to inspect the package, if they choose. Our policy is to replace damaged or incorrect products. If you choose not to accept a replacement, it is considered a regular return and subject to our return policy guidelines listed above.
Replacement Product
If we sent you something in error, and we send the correct item out but do not get the wrong one back within 10 business days, we will charge your credit card for the full amount of the replacement item or the incorrect item plus shipping, whichever is greater.
Warranty Replacement
If you feel a product you have purchased is defective or has failed under warranty, contact us. We will help determine the likelihood it is defective prior to your returning the product for inspection. This will save you time and money if there happens to be another reason for the problem you are having with the product. Once a product has been determined it may be defective and requires further inspection, we will instruct you as to your next course of action. This next step may vary depending on the guidelines set forth by the manufacturer. Shipping costs for returning parts for inspection and returning the part to you are usually your responsibility depending on the manufacturer and what their warranty policy is. More information can be found in our Customer Service section under the Product Warranties section.
Follow the steps below to return items that you no longer want:
If you have any questions about our return policy, please contact us.