- Free shipping
- 10% less
Your cart is empty
Subtotal:$0.00
The Grand Prix Inferno Appearance Package includes the Inferno Ram Air Hood, Front Air Dam and Rear Spoiler at a significant savings compared to ordering these three products separately. In fact, it is the same price as buying the Inferno Ram Air Hood and Inferno Rear Spoiler and getting the Inferno Front Air Dam for free. In addition, since they ship together, you’ll save a significant amount (up to $150) on shipping costs as well. Further savings may be had at your body shop as prep and paint for these items will most likely cost less having them all done at the same time versus separately. Grand Prix Inferno Ram Air Hood Product Description. As featured on the PFYC Grand Prix Inferno Show car that debuted at the 2003 SEMA Show in Las Vegas, we’re proud to announce the availability of the Grand Prix Inferno Ram Air Hood. This all new design was engineered from the ground up especially for the 2004+ Grand Prix. Featuring twin, low profile ram air inlets, the Grand Prix Inferno Ram Air Hood is not only attractive but functional. The ram air inlets duct air over to the airbox. Install a K&N Intake kit (found in the Under the Hood section) to make the inlets functional. The louvered heat extractors allow underhood heat to escape, helping to keep the engine bay cooler. With a finished underside, you’ll be just as proud to show your car with the hood up as you will with it down. The Fiberglass version weighs almost 25% less than a stock steel hood, about 10 lbs less! Grand Prix Inferno Rear Spoiler Product Description With an aggressive design styled to set your 2004+ Grand Prix apart from the rental car crowd, the Grand Prix Inferno Rear Spoiler is sure to please even the most discerning enthusiast. Meticulously constructed in the USA from hand laid fiberglass using the finest materials available. A carbon fiber version is also available for an additional cost. The Grand Prix Inferno Rear Spoiler replaces the factory rear spoiler using the same mounting holes and brake light as the factory rear spoiler. Bolts right on in minutes. The quality and craftsmanship is second to none. Comes unpainted, ready to prep and paint. Grand Prix Inferno Front Air Dam Product Description Finish off the front end of your 2004+ Grand Prix with the aggressively designed Grand Prix Inferno Front Air Dam (does not fit GXP). Styled to give your 2004 Grand Prix an intimidating look to match the intimidating performance of one of America’s hottest performance sedans on the market today. Meticulously constructed of high-pressure urethane using the finest materials available. High pressure urethane allows the part to be constructed with superior strength with a wall thickness less than half that of low pressure urethane constructed parts and provides an OEM quality product. The Grand Prix Inferno Front Air Dam is proudly made in the USA. The quality and craftsmanship is second to none. Comes unpainted, ready to prep and paint. Fits 2004-2008 Grand Prix only! Does not fit 1997-2003 Grand Prix. Front Air Dam does not fit GXP. *Savings based on regular retail price.
The Grand Prix Inferno Appearance Package includes the Inferno Ram Air Hood, Front Air Dam and Rear Spoiler at a significant savings compared to ordering these three products separately. In fact, it is the same price as buying the Inferno Ram Air Hood and Inferno Rear Spoiler and getting the Inferno Front Air Dam for free. In addition, since they ship together, you'll save a significant amount (up to $150) on shipping costs as well. Further savings may be had at your body shop as prep and paint for these items will most likely cost less having them all done at the same time versus separately.
Grand Prix Inferno Ram Air Hood Product Description.
As featured on the PFYC Grand Prix Inferno Show car that debuted at the 2003 SEMA Show in Las Vegas, we're proud to announce the availability of the Grand Prix Inferno Ram Air Hood. This all new design was engineered from the ground up especially for the 2004+ Grand Prix. Featuring twin, low profile ram air inlets, the Grand Prix Inferno Ram Air Hood is not only attractive but functional. The ram air inlets duct air over to the airbox. Install a K&N Intake kit (found in the Under the Hood section) to make the inlets functional. The louvered heat extractors allow underhood heat to escape, helping to keep the engine bay cooler. With a finished underside, you'll be just as proud to show your car with the hood up as you will with it down. The Fiberglass version weighs almost 25% less than a stock steel hood, about 10 lbs less!
Grand Prix Inferno Rear Spoiler Product Description
With an aggressive design styled to set your 2004+ Grand Prix apart from the rental car crowd, the Grand Prix Inferno Rear Spoiler is sure to please even the most discerning enthusiast.
Meticulously constructed in the USA from hand laid fiberglass using the finest materials available. A carbon fiber version is also available for an additional cost. The Grand Prix Inferno Rear Spoiler replaces the factory rear spoiler using the same mounting holes and brake light as the factory rear spoiler. Bolts right on in minutes. The quality and craftsmanship is second to none. Comes unpainted, ready to prep and paint.
Grand Prix Inferno Front Air Dam Product Description
Finish off the front end of your 2004+ Grand Prix with the aggressively designed Grand Prix Inferno Front Air Dam (does not fit GXP). Styled to give your 2004 Grand Prix an intimidating look to match the intimidating performance of one of America's hottest performance sedans on the market today.
Meticulously constructed of high-pressure urethane using the finest materials available. High pressure urethane allows the part to be constructed with superior strength with a wall thickness less than half that of low pressure urethane constructed parts and provides an OEM quality product. The Grand Prix Inferno Front Air Dam is proudly made in the USA. The quality and craftsmanship is second to none. Comes unpainted, ready to prep and paint.
Fits 2004-2008 Grand Prix only! Does not fit 1997-2003 Grand Prix. Front Air Dam does not fit GXP. *Savings based on regular retail price.
Shipping
We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of PFYC. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.
Sometimes a product needs to be returned. Our goal is to make this process as painless as possible. If you receive a product that is incorrect, damaged or inferior, please contact us immediately so we can begin the returns process and make sure you receive what you ordered quickly. For all returns, you must receive a Return Merchandise Authorization (RMA) number.
When you send back an item you no longer want, you have two choices for getting credit, assuming you properly followed all guidelines for returns:
You've Changed Your Mind
If you have ordered and received an item from PFYC.com that you no longer want, please follow the directions in the Returning Items section below. Please note that you are responsible for return shipping, and we will not reimburse you for the original shipping cost.
Incorrect or Damaged Product
If you have received damaged merchandise or have received items that you did not order, please contact us by replying to your e-mail receipt, making sure to copy the contents of the receipt in your e-mail. Simply let us know the error or that the product was damaged, and we'll take care of it at no cost to you, including all shipping charges (up to the original amount you paid for shipping). We will wait to receive and inspect the originally-shipped product prior to shipping a replacement. If a product was damaged during shipping, you must retain all materials until the shipper (UPS, FEDEX, etc.) has had a chance to inspect the package, if they choose. Our policy is to replace damaged or incorrect products. If you choose not to accept a replacement, it is considered a regular return and subject to our return policy guidelines listed above.
Replacement Product
If we sent you something in error, and we send the correct item out but do not get the wrong one back within 10 business days, we will charge your credit card for the full amount of the replacement item or the incorrect item plus shipping, whichever is greater.
Warranty Replacement
If you feel a product you have purchased is defective or has failed under warranty, contact us. We will help determine the likelihood it is defective prior to your returning the product for inspection. This will save you time and money if there happens to be another reason for the problem you are having with the product. Once a product has been determined it may be defective and requires further inspection, we will instruct you as to your next course of action. This next step may vary depending on the guidelines set forth by the manufacturer. Shipping costs for returning parts for inspection and returning the part to you are usually your responsibility depending on the manufacturer and what their warranty policy is. More information can be found in our Customer Service section under the Product Warranties section.
Follow the steps below to return items that you no longer want:
If you have any questions about our return policy, please contact us.