COUPON CODES PFYC5: $5 OFF ORDERS OVER $125   PFYC25: $25 OFF ORDERS OVER $275   PFYC50 $50 OFF ORDERS OVER $550

        K&N FIPK Air Intake for 300 Magnum Charger Challenger 3.5L V6 57-1543

        K&N Generation II Filter Injection Performance Kits (FIPKs) are built for many different vehicles and represent a dramatic improvement over a K&N Drop-in replacement filter alone; they use only non-metallic rotationally molded tubes that can keep air temperature down and decrease intake sound over a metal tube. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. Also known as a CAI or cold air intake the FIPK's aerodynamically engineered tube drives a massive amount of air into an engine, which translates into HORSEPOWER. K&N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N Drop-in replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next they attach the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows us to precisely shape the tube to reduce turbulence and accelerate airflow into the engine. This is why some of our tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicone and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today. Guaranteed to Provide more Horsepower and Torque and Increased Acceleration Engineered to Specific Vehicle Design Easy to Install, Usually in 90 minutes or less! Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions) Million Mile Limited Warranty Replaces OEM Filter and Air Box Air Filter is Washable and Reusable Works with Original Equipment Manufacturer Computer Systems Designed to use Factory Holes & Mounting Points Whenever Possible Most are CARB Exempt Product Specifications Product Style: 57 Series FIPK Estimated Horsepower Gain: 11.7 HP @ 6215 RPM Type: Gen II Replacement Filter: RF-1048 CARB EO Number: D-269-34 Weight: 9.7 lb (4.4 kg)
        4.5
        K&N
        Regular Product
        • Free shipping
          • 10% less
          Market price: $386.74, you save $36.75
        • $349.99

          • SKU
            LX3027
          • Weight
            13 lbs
          • Barcode
            024844109125
          • Manufacturer Part #
            57-1543
        K&N Generation II Filter Injection Performance Kits (FIPKs) are built for many different vehicles and represent a dramatic improvement over a K&N Drop-in replacement filter alone; they use only non-metallic rotationally molded tubes that can keep air temperature down and decrease intake sound over a metal tube. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. Also known as a CAI or cold air intake the FIPK's aerodynamically engineered tube drives a massive amount of air into an engine, which translates into HORSEPOWER.

        K&N starts with the largest conical shaped high-flow air filter they can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N Drop-in replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next they attach the filter to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows us to precisely shape the tube to reduce turbulence and accelerate airflow into the engine. This is why some of our tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicone and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today.

        • Guaranteed to Provide more Horsepower and Torque and Increased Acceleration
        • Engineered to Specific Vehicle Design
        • Easy to Install, Usually in 90 minutes or less!
        • Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions)
        • Million Mile Limited Warranty
        • Replaces OEM Filter and Air Box
        • Air Filter is Washable and Reusable
        • Works with Original Equipment Manufacturer Computer Systems
        • Designed to use Factory Holes & Mounting Points Whenever Possible
        • Most are CARB Exempt

        Product Specifications

        • Product Style: 57 Series FIPK
        • Estimated Horsepower Gain: 11.7 HP @ 6215 RPM
        • Type: Gen II
        • Replacement Filter: RF-1048
        • CARB EO Number: D-269-34
        • Weight: 9.7 lb (4.4 kg)
        Customer reviews
        Average rating:
        4.5
        4.50
        (Votes: 4)
        Rating of votes (4)
        5
        1.0
         
         
        2customers
        4
        1.0
         
         
        2customers
        3
        1.0
         
         
        0customers
        2
        1.0
         
         
        0customers
        1
        1.0
         
         
        0customers
         
        Please sign in to add review
        • Oct 17, 2013, 02:11
          5.0
          I just had this installed by a local shop and I am very pleased. It sounds great and performs well. It has a nice roar to it when under hard acceleration.
        • Nov 20, 2012, 07:57
          4.0
          - Easy, straightforward install!
          - Unbeatable price with free shipping!
          - Noticeable power improvement!
          - Whistle at low rpms, roar at high rpms!
          I'm overall very pleased with my purchase, there are only pros to this K&N intake kit. I highly recommend to anyone who wants a little extra from their car.

          *Installed on 2000 Pontiac Grand Prix GT w/93k miles
        • Dec 12, 2010, 20:51
          4.0
          Very simple and straight forward with installation, step-by-step instructions. Great Product. Looks great and adds a slightly deeper sound in mid range RPM's.

          The only bad thing is there's not much of a noticeable power gain. 13.4hp? I doubt that much. Still runs great though.
        • Jul 10, 2009, 20:14
          5.0
          I just got this air intake kit installed in my car and by far the best thing i ever got. it made the car sound like a v8 at high rpm but also with dynomax catback system. You can feel the performance increase right away. It was shipped fast, easy to install overall i am very happy with this product. Its a must have in any grand prix.

        Shipping

        We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of PFYC. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.

        Sometimes a product needs to be returned. Our goal is to make this process as painless as possible. If you receive a product that is incorrect, damaged or inferior, please contact us immediately so we can begin the returns process and make sure you receive what you ordered quickly. For all returns, you must receive a Return Merchandise Authorization (RMA) number.

        • Getting Credit for Returned Items
        • PFYC's Return Policy
        • Types of Returns
          • You Changed Your Mind
          • Incorrect or Damaged Product
          • Replacement Product
        • Returning Items

        Getting Credit for Returned Items

        When you send back an item you no longer want, you have two choices for getting credit, assuming you properly followed all guidelines for returns:

        1. Store credit in full for the product, not including shipping charges
        2. Refund to your credit card minus a 20% restocking fee and not including shipping charges

        PFYC's Return Policy

        • PFYC.com will not accept returns of electrical or electronic products - no exceptions.
        • Vinyl Stripe Kits - We do not accept returns on these. They are custom made to order. No refunds or exchanges. No exceptions.
        • Used items may not be returned under any circumstances.
        • We are not responsible for items damaged by improper use or installation.
        • All products must be received by our Returns Processing Center within 10 business days of receiving a Return Merchandise Authorization (RMA) number or they may be refused.
        • The RMA numbers must appear on the shipping labels we provide. PLEASE DO NOT MARK ON THE OUTSIDE OF THE BOX.
        • All items must be returned with original packaging and materials and be in perfect, new condition.
        • Shipping and handling charges are not refundable. You are responsible for insuring returns.
        • Products returned that were purchased during a Free Shipping promotion are subject to having regular shipping charges deducted from any refund.
        • Any deviation from the return process outlined above will result in a delay or refusal of your refund and an additional restocking fee of up to 30%.
        • All returns are subject to a 25% restocking fee at our discretion.
        • Returns must be made within 30 days of receiving the product.

        Types of Returns

        You've Changed Your Mind

        If you have ordered and received an item from PFYC.com that you no longer want, please follow the directions in the Returning Items section below. Please note that you are responsible for return shipping, and we will not reimburse you for the original shipping cost.

        Incorrect or Damaged Product

        If you have received damaged merchandise or have received items that you did not order, please contact us by replying to your e-mail receipt, making sure to copy the contents of the receipt in your e-mail. Simply let us know the error or that the product was damaged, and we'll take care of it at no cost to you, including all shipping charges (up to the original amount you paid for shipping). We will wait to receive and inspect the originally-shipped product prior to shipping a replacement. If a product was damaged during shipping, you must retain all materials until the shipper (UPS, FEDEX, etc.) has had a chance to inspect the package, if they choose. Our policy is to replace damaged or incorrect products. If you choose not to accept a replacement, it is considered a regular return and subject to our return policy guidelines listed above.

        Replacement Product

        If we sent you something in error, and we send the correct item out but do not get the wrong one back within 10 business days, we will charge your credit card for the full amount of the replacement item or the incorrect item plus shipping, whichever is greater.

        Warranty Replacement

        If you feel a product you have purchased is defective or has failed under warranty, contact us. We will help determine the likelihood it is defective prior to your returning the product for inspection. This will save you time and money if there happens to be another reason for the problem you are having with the product. Once a product has been determined it may be defective and requires further inspection, we will instruct you as to your next course of action. This next step may vary depending on the guidelines set forth by the manufacturer. Shipping costs for returning parts for inspection and returning the part to you are usually your responsibility depending on the manufacturer and what their warranty policy is. More information can be found in our Customer Service section under the Product Warranties section.

        Returning Items

        Follow the steps below to return items that you no longer want:

        1. Click here to fill out the RMA request form. Fill out one form per item you are returning.
        2. Wait for us to send you an RMA number and a return shipment address.
        3. Send the item to the designated address. Make sure to use the lowest cost method available and make sure the return package is traceable; we are not responsible if it gets lost in the mail on the way back to us. You are responsible for any additional insurance required to protect the value of the package.

        If you have any questions about our return policy, please contact us.