HOLIDAY SAVINGS NOW!! INCREDIBLE SAVINGS WITH COUPON CODES:
PFYC5: $5 OFF ORDERS OVER $125 PFYC25: $25 OFF ORDERS OVER $275 PFYC50 $50 OFF ORDERS OVER $550

Previous imageNext image

        Camaro Plug and Play Sequential Rear Light Kit

        SKU: CA1005
        This OEM quality plug and play sequential turn signal kit easily plugs into the brake/tail light bulb socket at the back of your 5th generation Camaro or C5. Two identical modules are included in this kit, one for each side of the vehicle. The sequential delay alters the outer turn signal (brake) light so that your rear lights appear to flash in sequence rather than together as they normally operate. There are plenty of videos to show how this works on internet video sites. This is the best priced kit on the market and the quality is second to none. Here's how it works: The circuitry in this module produces a slight delay which causes your outer turn signal light filament to come on a bit later than the in-board turn signal light. When the signal blinks, a sequential step between the inboard and the outboard light displays an outward-flowing effect, as opposed to two bulbs lighting at the same time. The delay is long enough to display a sequential effect, but short enough to prevent a diagnostics "burned out bulb" error in the vehicle. Please note that your brake lights will both sequence outward when the brakes are applied. When braking, the sequence will only occur once. When you are using the turn signals, it will sequence continuously until the signal is canceled either by the driver or after the turn is completed. Installation is simple: (The following notes are for Camaro) . Open the deck lid Remove the access cover using a panel removal tool or thin screwdriver to release the plastic fasteners Pop the fastener head upward and remove the fastener body Inside the pocket, locate the 3-wire connector that plugs into the light bulb assembly. Press the top latch down and pull the connector from the bulb assembly. Repeat procedure on passenger side Test turn signals; you will notice a "sequential" flashing on either side. Once both modules are installed and tested, replace covers and fasteners.
        4.6
        Caspers
        Regular Product
        • Free shipping
          • 9% less
          Market price: $93.91, you save $8.92
        • $84.99

        If you're looking to make your Camaro standout but don't want to spend an arm and leg on some of those expensive upgrades. This OEM quality plug and play sequential turn signal kit easily plugs into the brake/tail light bulb socket at the back of your 5th generation Camaro. Two identical modules are included in this kit, one for each side of the vehicle. The sequential delay alters the outer turn signal (brake) light so that your rear lights appear to flash in sequence rather than together as they normally operate. There are plenty of videos to show how this works on internet video sites. This is the best priced kit on the market and the quality is second to none.

        Here's how it works: The circuitry in this module produces a slight delay which causes your outer turn signal light filament to come on a bit later than the in-board turn signal light. When the signal blinks, a sequential step between the inboard and the outboard light displays an outward-flowing effect, as opposed to two bulbs lighting at the same time. The delay is long enough to display a sequential effect, but short enough to prevent a diagnostics "burned out bulb" error in the vehicle. Please note that your brake lights will both sequence outward when the brakes are applied.

        When braking, the sequence will only occur once. When you are using the turn signals, it will sequence continuously until the signal is canceled either by the driver or after the turn is completed.

        Installation is simple: (The following notes are for Camaro)

        .

        • Open the deck lid
        • Remove the access cover using a panel removal tool or thin screwdriver to release the plastic fasteners
        • Pop the fastener head upward and remove the fastener body
        • Inside the pocket, locate the 3-wire connector that plugs into the light bulb assembly. Press the top latch down and pull the connector from the bulb assembly.
        • Repeat procedure on passenger side
        • Test turn signals; you will notice a "sequential" flashing on either side.
        • Once both modules are installed and tested, replace covers and fasteners.
          • SKU
            CA1005
          • Weight
            1 lbs
          • Manufacturer Part #
            102161
        Customer reviews
        Average rating:
        4.6
        4.58
        (Votes: 19)
        Rating of votes (19)
        5
        1.0
         
         
        13customers
        4
        1.0
         
         
        4customers
        3
        1.0
         
         
        2customers
        2
        1.0
         
         
        0customers
        1
        1.0
         
         
        0customers
         
        Please sign in to add review
        • Mar 18, 2022, 04:22
          5.0
          Easy install, Added blackout tail lights. Sets my Vette apart from others.
        • Oct 19, 2020, 15:20
          5.0
          I bought them for my C5 Corvette cut them up and wired it into my Wiring harness
        • Mar 25, 2019, 04:41
          5.0
          Really like the looks but 1 side stopped working within months. No place wants to sell just 1 side ??????
        • Jan 15, 2017, 06:36
          5.0
          Very easy to install. Really cool lighting affect. Would recommend to anyone who wants to make his vette different and stand out.
        • Nov 2, 2015, 06:50
          5.0
          First it was very easy to install! Next it gave my wife's 2011 Camaro a great look!

        Shipping

        We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of PFYC. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.

        Sometimes a product needs to be returned. Our goal is to make this process as painless as possible. If you receive a product that is incorrect, damaged or inferior, please contact us immediately so we can begin the returns process and make sure you receive what you ordered quickly. For all returns, you must receive a Return Merchandise Authorization (RMA) number.

        • Getting Credit for Returned Items
        • PFYC's Return Policy
        • Types of Returns
          • You Changed Your Mind
          • Incorrect or Damaged Product
          • Replacement Product
        • Returning Items

        Getting Credit for Returned Items

        When you send back an item you no longer want, you have two choices for getting credit, assuming you properly followed all guidelines for returns:

        1. Store credit in full for the product, not including shipping charges
        2. Refund to your credit card minus a 20% restocking fee and not including shipping charges

        PFYC's Return Policy

        • PFYC.com will not accept returns of electrical or electronic products - no exceptions.
        • Vinyl Stripe Kits - We do not accept returns on these. They are custom made to order. No refunds or exchanges. No exceptions.
        • Custom-made-to-order items are NOT returnable. This includes embroidered floor mats, interior embroidered items, and car covers.
        • Used items may not be returned under any circumstances.
        • We are not responsible for items damaged by improper use or installation.
        • All products must be received by our Returns Processing Center within 10 business days of receiving a Return Merchandise Authorization (RMA) number or they may be refused.
        • The RMA numbers must appear on the shipping labels we provide. PLEASE DO NOT MARK ON THE OUTSIDE OF THE BOX.
        • All items must be returned with original packaging and materials and be in perfect, new condition.
        • Shipping and handling charges are not refundable. You are responsible for insuring returns.
        • Products returned that were purchased during a Free Shipping promotion are subject to having regular shipping charges deducted from any refund.
        • Any deviation from the return process outlined above will result in a delay or refusal of your refund and an additional restocking fee of up to 30%.
        • All returns are subject to a 25% restocking fee at our discretion.
        • Returns must be made within 30 days of receiving the product.

        Types of Returns

        You've Changed Your Mind

        If you have ordered and received an item from PFYC.com that you no longer want, please follow the directions in the Returning Items section below. Please note that you are responsible for return shipping, and we will not reimburse you for the original shipping cost.

        Incorrect or Damaged Product

        If you have received damaged merchandise or have received items that you did not order, please contact us by replying to your e-mail receipt, making sure to copy the contents of the receipt in your e-mail. Simply let us know the error or that the product was damaged, and we'll take care of it at no cost to you, including all shipping charges (up to the original amount you paid for shipping). We will wait to receive and inspect the originally-shipped product prior to shipping a replacement. If a product was damaged during shipping, you must retain all materials until the shipper (UPS, FEDEX, etc.) has had a chance to inspect the package, if they choose. Our policy is to replace damaged or incorrect products. If you choose not to accept a replacement, it is considered a regular return and subject to our return policy guidelines listed above.

        Replacement Product

        If we sent you something in error, and we send the correct item out but do not get the wrong one back within 10 business days, we will charge your credit card for the full amount of the replacement item or the incorrect item plus shipping, whichever is greater.

        Warranty Replacement

        If you feel a product you have purchased is defective or has failed under warranty, contact us. We will help determine the likelihood it is defective prior to your returning the product for inspection. This will save you time and money if there happens to be another reason for the problem you are having with the product. Once a product has been determined it may be defective and requires further inspection, we will instruct you as to your next course of action. This next step may vary depending on the guidelines set forth by the manufacturer. Shipping costs for returning parts for inspection and returning the part to you are usually your responsibility depending on the manufacturer and what their warranty policy is. More information can be found in our Customer Service section under the Product Warranties section.

        Returning Items

        Follow the steps below to return items that you no longer want:

        1. Click here to fill out the RMA request form. Fill out one form per item you are returning.
        2. Wait for us to send you an RMA number and a return shipment address.
        3. Send the item to the designated address. Make sure to use the lowest cost method available and make sure the return package is traceable; we are not responsible if it gets lost in the mail on the way back to us. You are responsible for any additional insurance required to protect the value of the package.

        If you have any questions about our return policy, please contact us.

        Related products