COUPON CODES PFYC5: $5 OFF ORDERS OVER $125   PFYC25: $25 OFF ORDERS OVER $275   PFYC50 $50 OFF ORDERS OVER $550
Previous image
Wind Restrictor Logo Wind Screen for 2007 2008 2009 Saturn Sky
  • Free shipping
Next image

        Wind Restrictor Logo Wind Screen for 2007 2008 2009 Saturn Sky

        Our made-in-the-USA Wind Restrictor is an amazing, unique and durable product that blocks as much (or more) wind turbulence than the factory OEM mesh net windscreens and helps to maintain the temperature inside of your roadster when the top is down. All of the Wind Restrictors we offer can remain in place with the roof closed and are mounted solidly yet inconspicuously without any permanent alterations required. How does it work? The Wind Restrictor is designed to significantly reduce back draft. Back draft is created when wind pressure inside your car's cabin is less than the wind pressure outside the car. The cabin acts as a vacuum and gusty wind enters from behind the passengers, creating noise and buffeting. The WR will block this wind from entering the cabin at highway speeds. You can control the amount of wind by adjusting the side windows. The lower you put your side windows, the windier it will be inside your cabin. Put them up completely to reduce wind as much as possible. With the Wind Restrictor you can: Eliminate most wind turbulence and noise Personalize your roadster with illuminated graphics Advertise your business with a custom, etched logo Wire it to brake lamps, fog lamps, head lamps, or a switch Prevent driver fatigue Carry on conversations with your passenger without raising your voice Arrive with your hair in place and free of tangles (especially long hair) Enjoy more of the full richness and clarity of your stereo Help maintain the temperature in in the cabin when your top is down The only wind deflecting device to have all of the following features... Made from double-sided AR Polycarbonate This very durable acrylic type material is also scratch resistant. Others are made out of much cheaper materials and dangerously breakable plastics. Some are Lexan: the disadvantage is that it scratches easily and won't emit illumination and may also discolor with etching. Professionally and precisely designed and laser cut Others are produced at home using table routers and jigsaws leaving rough edges and defective shapes. Wind Restrictors are professionally produced from the finest materials using state-of-the-art equipment. Illumination available The only wind deflecting device on the market that has this patent pending feature! You can have the Wind Restrictor Light Kit hard wired to any 12 volt wire in the car. Most car audio/electronic shops or dealerships can wire it or you can do it yourself in less than 1 hour. A cigarette lighter plug adapter or AAA battery pack can be added for an easy, convenient connection. Laser etching available Etched with a high powered laser to really make your roadster unique and stand out. The engraving will also emit light and give off an awesome glowing effect with a light kit installed. Personalize your roadster with a custom logo or any of our standard graphics Perfectly formed to the contours of your roadster Others are not designed or manufactured to fit the body lines or roll bars on your roadster. Attaches to your roadster without permanent alteration or tacky fixtures No drilling of holes, adhesive tape, Velcro or straps.

        4.6
        Wind Restrictor
        Regular Product
        • + $14.00
        • + $7.00
        • + $35.00
        • $263.50

        Our made-in-the-USA Wind Restrictor is an amazing, unique and durable product that blocks as much (or more) wind turbulence than the factory OEM mesh net windscreens and helps to maintain the temperature inside of your roadster when the top is down. All of the Wind Restrictors we offer can remain in place with the roof closed and are mounted solidly yet inconspicuously without any permanent alterations required.

        How does it work?

        The Wind Restrictor is designed to significantly reduce back draft. Back draft is created when wind pressure inside your car's cabin is less than the wind pressure outside the car. The cabin acts as a vacuum and gusty wind enters from behind the passengers, creating noise and buffeting. The WR will block this wind from entering the cabin at highway speeds. You can control the amount of wind by adjusting the side windows. The lower you put your side windows, the windier it will be inside your cabin. Put them up completely to reduce wind as much as possible.

        With the Wind Restrictor you can:

        • Eliminate most wind turbulence and noise
        • Personalize your roadster with illuminated graphics
        • Advertise your business with a custom, etched logo
        • Wire it to brake lamps, fog lamps, head lamps, or a switch
        • Prevent driver fatigue
        • Carry on conversations with your passenger without raising your voice
        • Arrive with your hair in place and free of tangles (especially long hair)
        • Enjoy more of the full richness and clarity of your stereo
        • Help maintain the temperature in in the cabin when your top is down

        The only wind deflecting device to have all of the following features...

        • Made from double-sided AR Polycarbonate This very durable acrylic type material is also scratch resistant. Others are made out of much cheaper materials and dangerously breakable plastics. Some are Lexan: the disadvantage is that it scratches easily and won't emit illumination and may also discolor with etching.
        • Professionally and precisely designed and laser cut Others are produced at home using table routers and jigsaws leaving rough edges and defective shapes. Wind Restrictors are professionally produced from the finest materials using state-of-the-art equipment.
        • Illumination available The only wind deflecting device on the market that has this patent pending feature! You can have the Wind Restrictor Light Kit hard wired to any 12 volt wire in the car. Most car audio/electronic shops or dealerships can wire it or you can do it yourself in less than 1 hour. A cigarette lighter plug adapter or AAA battery pack can be added for an easy, convenient connection.
        • Laser etching available Etched with a high powered laser to really make your roadster unique and stand out. The engraving will also emit light and give off an awesome glowing effect with a light kit installed. Personalize your roadster with a custom logo or any of our standard graphics
        • Perfectly formed to the contours of your roadster Others are not designed or manufactured to fit the body lines or roll bars on your roadster.
        • Attaches to your roadster without permanent alteration or tacky fixtures No drilling of holes, adhesive tape, Velcro or straps.
        • Extremely smooth crystal-clear edges Others are sometimes sharp and ridged; ours are laser cut smoothly to perfection and then flame polished so that the Wind Restrictor looks and feels like "a million bucks" as well as emitting the best quality illumination
        • Easy installation 1. Remove 2-4 screws from your rear panel 2. Mount the Wind Restrictor into place 3. Put extended screw connectors back in place! Total installation time is about 5-8 minutes.

        Version Options:Version 1 mounts with 4 replacement screws on the back side of the rear silver panel. No drilling is necessary (the screws replace shorter screws already in place). We suggest removing this version if you are leaving your top up for extended periods of time (such as winter storage), but it can be left in place for daily use and while the top is either up or down. 1/8" thick. Version 2 mounts above waterfall compartment to the front side of the silver panel with dual-lock fasteners. No alterations or damage whatsoever to your vehicle. Dual lock fasteners can be removed later without any remnants. Can be left in place with top up. No drilling necessary. Mounting points are hidden when installed. 1/4" thick.

        Extreme Lighting Kit: With our new Extreme Lighting Kit, you can choose which color you want your Wind Restrictor to light up in - no longer do you have to choose a pre-defined color. Choose from red, white, blue, pink, yellow, green, or cyan any time you wish. The unit comes with a remote control that you can use to turn the lights on or off or change the color. The controller features a cool "fade" option and also a "blink" option for use at car shows or gatherings. Requires a 12V plug and can be either hardwired or used with a 12V outlet in your car for maximum flexibility.

        Click here to read version 1 installation instructions

        Click here to read version 2 installation instructions



        We assume you're here because you're looking for something to block the wind in your car. There are a lot of names people might use to find such a device, words like wind screen, wind deflector, wind stop, wind blocker, wind block, etc. Hopefully you found us and like what you see. These are awesome, show-stopping wind blockers that do a lot more than just help you stay un-breezy.

          • SKU
            SK1003
          • Manufacturer Part #
            SK1003
        Customer reviews
        Average rating:
        4.6
        4.57
        (Votes: 7)
        Rating of votes (7)
        5
        1.0
         
         
        5customers
        4
        1.0
         
         
        1customers
        3
        1.0
         
         
        1customers
        2
        1.0
         
         
        0customers
        1
        1.0
         
         
        0customers
         
        Please sign in to add review
        • Jul 17, 2020, 18:20
          5.0
          I like the fact that it's on the car and it looks great. What I don't like is that ever since I hooked them into the harness the electronic brake control module has thrown a code and would you be surprised if I told you it is the right rear wheel speed sensor circuit. I clipped it into the dark brown wire so here we go with another issue.
        • Jul 24, 2017, 21:19
          4.0
          The end result is a pretty nice effect. The product does not disappoint in its ability to "restrict" the wind that comes into the cabin of the car. With the windows up and the roof down there is a very noticeable difference. The installation directions are not as precise as I needed them to be, so there was measuring and remeasuring required. However well made the product is, it is made of acrylic and has a slight bounce while traveling at and speed. Over all I really like the product and am happy to have it in my car.
        • Jul 11, 2017, 23:08
          5.0
          Very easy to install all instructions complete with exact pictures. Only the light was a nucinc connector to get to tuck in the panel joint . Over all very satisfied .
          Would do business again in future.
        • Jul 29, 2015, 10:18
          5.0
          Love it! Not only does it help with wind it looks really sharp on the car. The online chat customer representative steered us in the right direction on this purchase!
        • Jul 24, 2015, 10:37
          5.0
          This works very well. I put a little extra and where the Restrictor mounts I put 2 machine screws through the bracket to the car frame to cut down the vibration. Installing the light bar has many options.

        Shipping

        We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of PFYC. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.

        We accept the following payment methods:

        Accepted payment methods

        To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.

        Sometimes a product needs to be returned. Our goal is to make this process as painless as possible. If you receive a product that is incorrect, damaged or inferior, please contact us immediately so we can begin the returns process and make sure you receive what you ordered quickly. For all returns, you must receive a Return Merchandise Authorization (RMA) number.

        Getting Credit for Returned Items

        When you send back an item you no longer want, you have two choices for getting credit, assuming you properly followed all guidelines for returns:

        1. Store credit in full for the product, not including shipping charges
        2. Refund to your credit card minus a 20% restocking fee and not including shipping charges

        PFYC's Return Policy

        • PFYC.com will not accept returns of electrical or electronic products - no exceptions.
        • Vinyl Stripe Kits - We do not accept returns on these. They are custom made to order. No refunds or exchanges. No exceptions.
        • Used items may not be returned under any circumstances.
        • We are not responsible for items damaged by improper use or installation.
        • All products must be received by our Returns Processing Center within 10 business days of receiving a Return Merchandise Authorization (RMA) number or they may be refused.
        • The RMA numbers must appear on the shipping labels we provide. PLEASE DO NOT MARK ON THE OUTSIDE OF THE BOX.
        • All items must be returned with original packaging and materials and be in perfect, new condition.
        • Shipping and handling charges are not refundable. You are responsible for insuring returns.
        • Products returned that were purchased during a Free Shipping promotion are subject to having regular shipping charges deducted from any refund.
        • Any deviation from the return process outlined above will result in a delay or refusal of your refund and an additional restocking fee of up to 30%.
        • All returns are subject to a 25% restocking fee at our discretion.
        • Returns must be made within 30 days of receiving the product.

        Types of Returns

        You've Changed Your Mind

        If you have ordered and received an item from PFYC.com that you no longer want, please follow the directions in the Returning Items section below. Please note that you are responsible for return shipping, and we will not reimburse you for the original shipping cost.

        Incorrect or Damaged Product

        If you have received damaged merchandise or have received items that you did not order, please contact us by replying to your e-mail receipt, making sure to copy the contents of the receipt in your e-mail. Simply let us know the error or that the product was damaged, and we'll take care of it at no cost to you, including all shipping charges (up to the original amount you paid for shipping). We will wait to receive and inspect the originally-shipped product prior to shipping a replacement. If a product was damaged during shipping, you must retain all materials until the shipper (UPS, FEDEX, etc.) has had a chance to inspect the package, if they choose. Our policy is to replace damaged or incorrect products. If you choose not to accept a replacement, it is considered a regular return and subject to our return policy guidelines listed above.

        Replacement Product

        If we sent you something in error, and we send the correct item out but do not get the wrong one back within 10 business days, we will charge your credit card for the full amount of the replacement item or the incorrect item plus shipping, whichever is greater.

        Warranty Replacement

        If you feel a product you have purchased is defective or has failed under warranty, contact us. We will help determine the likelihood it is defective prior to your returning the product for inspection. This will save you time and money if there happens to be another reason for the problem you are having with the product. Once a product has been determined it may be defective and requires further inspection, we will instruct you as to your next course of action. This next step may vary depending on the guidelines set forth by the manufacturer. Shipping costs for returning parts for inspection and returning the part to you are usually your responsibility depending on the manufacturer and what their warranty policy is. More information can be found in our Customer Service section under the Product Warranties section.

        Returning Items

        Follow the steps below to return items that you no longer want:

        1. Click here to fill out the RMA request form. Fill out one form per item you are returning.
        2. Wait for us to send you an RMA number and a return shipment address.
        3. Send the item to the designated address. Make sure to use the lowest cost method available and make sure the return package is traceable; we are not responsible if it gets lost in the mail on the way back to us. You are responsible for any additional insurance required to protect the value of the package.

        If you have any questions about our return policy, please contact us.

        Related products