- Free shipping
- 10% less
Your cart is empty
Subtotal:$0.00
Once installed, the Window Valet for C6 is configured by using the buttons on the Driver's Instrument Center. A few clicks tells the Window Valet which features to enable.
** Moving power windows can be dangerous if someone or something were to become pinched or trapped. By installing this product, you agree to the Terms of Use, Warranty, and Liability Waiver at the bottom of the page. Never use the remote power window feature unless both windows are completely clear of obstructions.
The Window Valet for C6 plugs into the diagnostics port underneath the steering column, just past the edge of the dash trim. There's no configuration required. Just plug it in! The Window Valet for C6 does not reprogram any of the car's computers. So to reverse the install, just unplug the unit, and the C6 will immediately revert back to stock.
Simple operation: To lower the windows via remote, press the remote unlock button three times. To raise the windows, press the remote lock button three times. (Or to prevent the C6 from blowing its horn multiple times, unlock-unlock-lock may be used.) For the features to activate, the buttons must be pressed in rapid succession, with less than one second between two sequential clicks.
Special Window Venting Feature: The window venting feature allows you to use the remote to leave the windows down about half-an-inch for airflow on hot days. To use this feature, simply issue the remote window up command when both windows are already in the fully up position. The Window Valet for C6 will recognize that the windows are already up and assume that you want to vent the windows. This feature, just like the remote window control, does not require any additional configuration.
Bonus Features: The Window Valet for C6 includes several bonus features in addition to remote window control. There is a special "subtle alarm" warning mode, an unlock on hand brake feature, and a high speed/tach report.
Bonus Feature Configuration Process: To configure bonus features 1 and 2, press the driver's door panel unlock button quickly six (6) times. The tachometer will move to 1 krpm and the speedometer will either read 30 mph or 0 mph depending on whether or not the first feature (Subtle Alarm) is configured to be ON or OFF. Pressing the FUEL button will then toggle the ON/OFF configuration of the Subtle Alarm mode. Pressing another button, such as GAUGES will recall the configuration status for another feature. That feature can then be toggled ON or OFF by simply pressing its associated button again until the desired setting is achieved. Press RESET to exit configuration mode. All changes are automatically saved inside the Window Valet for C6. This data will be saved if the unit is removed and re-installed later.
Configuration Options:
Feature | Button | Tachometer(KRPM) | Speedometer (MPH) |
Subtle Alarm | 1-FUEL | 1 | 0=off; 30=on |
Unlock on Brake | 2-GAUGES | 2 | 0=off; 30=on |
When configured at the factory, all bonus features are disabled so that no one is surprised by an unexpected action, such as the doors unlocking when the handbrake is set. Here's an example that shows exactly how to set the unlock on brake feature: To set the Unlock on brake feature, enter configuration mode by pressing unlock on the driver door panel six (6) times. Note that the tachometer is now reading 1 KRPM indicating that configuration mode is active and that the Subtle Alarm feature is being reviewed. Press the GAUGES button on the Instrument Panel Cluster to review the Unlock on brake feature. If fresh from the factory, the speedometer should now read 0 mph (feature off) while the tachometer will read about 2 KRPM. Press the GAUGES button again to activate the feature and note that the speedometer will now show 30 mph. (Pressing the GAUGES button another time will toggle the feature off again and indicate so by moving the speedometer back to 0 mph.) Press RESET on the Instrument Panel Cluster to exit configuration mode, or select another features to review or change.
Note: The C6 may toot its horn on the second and third remote lock commands even if its horn configuration is set to silent when locking. This is a feature of the C6, not the Window Valet, and is designed to act as a lock confirmation. To prevent the horn from blowing when remotely raising the windows, you may use the alternate window up command sequence: Unlock, Unlock, Lock.
Shipping
We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of PFYC. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.
Sometimes a product needs to be returned. Our goal is to make this process as painless as possible. If you receive a product that is incorrect, damaged or inferior, please contact us immediately so we can begin the returns process and make sure you receive what you ordered quickly. For all returns, you must receive a Return Merchandise Authorization (RMA) number.
When you send back an item you no longer want, you have two choices for getting credit, assuming you properly followed all guidelines for returns:
You've Changed Your Mind
If you have ordered and received an item from PFYC.com that you no longer want, please follow the directions in the Returning Items section below. Please note that you are responsible for return shipping, and we will not reimburse you for the original shipping cost.
Incorrect or Damaged Product
If you have received damaged merchandise or have received items that you did not order, please contact us by replying to your e-mail receipt, making sure to copy the contents of the receipt in your e-mail. Simply let us know the error or that the product was damaged, and we'll take care of it at no cost to you, including all shipping charges (up to the original amount you paid for shipping). We will wait to receive and inspect the originally-shipped product prior to shipping a replacement. If a product was damaged during shipping, you must retain all materials until the shipper (UPS, FEDEX, etc.) has had a chance to inspect the package, if they choose. Our policy is to replace damaged or incorrect products. If you choose not to accept a replacement, it is considered a regular return and subject to our return policy guidelines listed above.
Replacement Product
If we sent you something in error, and we send the correct item out but do not get the wrong one back within 10 business days, we will charge your credit card for the full amount of the replacement item or the incorrect item plus shipping, whichever is greater.
Warranty Replacement
If you feel a product you have purchased is defective or has failed under warranty, contact us. We will help determine the likelihood it is defective prior to your returning the product for inspection. This will save you time and money if there happens to be another reason for the problem you are having with the product. Once a product has been determined it may be defective and requires further inspection, we will instruct you as to your next course of action. This next step may vary depending on the guidelines set forth by the manufacturer. Shipping costs for returning parts for inspection and returning the part to you are usually your responsibility depending on the manufacturer and what their warranty policy is. More information can be found in our Customer Service section under the Product Warranties section.
Follow the steps below to return items that you no longer want:
If you have any questions about our return policy, please contact us.