LED Light Upgrade for Factory Speedometer and Gauge Cluster

Tired of the dim lighting in your vehicle's stock speedometer? Got a light burned out? We have the best solution: LEDs! Upgrade your speedometer to virtually everlasting and very bright LEDs or just put them in and change the color of your stock dash.

Please note before ordering: In some cases, these LEDs may not produce the expected amount of light output due to the gauge face itself. Changing the gauge face may be required to get a brighter light. For example a blue LED light will not light up through a red gauge face. We are not responsible for loss, damage, or injury relating to use of this product.

Do it Yourself

• Kit A: 25 surface mount LEDs (requires soldering)
• Kit B: 6 twist in/out LEDs with 1/2 inch base (plug and play)
• Kit C: 4 twist in/out LEDs with 1/2 inch base and 2 with 3/8 inch base (plug and play)
• Kit D: 7 twist in/out LEDs with 3/8 inch base (plug and play)
• Kit E: 10 surface mount cube LEDs (requires soldering)
• Kit F: 25 surface mount LEDs (requires soldering)

This can be an easy upgrade for your speedometer. Some are as easy as a twist in / twist out bulb swap. Replace your old bulbs with the latest LED technology and never replace them again. These LED are capable of lasting between 25,000 and 100,000 hours of use. Replace them once, then never again.

Get the LED advantage

Each of these have been specially designed to give the best color and lighting specific to speedometers. The manufacturer is an expert and OEM-quality manufacturer of speedometer faces and now bulbs. These LEDs have a higher light output, less energy consumption and operate 75% cooler than a traditional light bulb already installed in your dash. Get the best available!

Technical Information

Each new LED is ready to install: no additional modifications will be required to the LED or circuit board. You will need to remove the stock light bulb as shown in the install guide that will come with your kit. Some LEDs that are designed to mount to the board and will need to be soldered into it place. The manufacturer has designed step by step install guides to assist with the installation. Tech support and installation service is also available.

A note regarding color changes: Changing the color of the LED may or may not give you the desired night color you are looking for. A change of the gauge face may be required.

Kit Contents

Color note: Red, blue, green, and white are generally in stock and ship within one business day of your order.

Return policy: Unopened parts (i.e. tamper seal intact) are returnable per our returns policy, but opened parts, even if not installed, are not returnable under any circumstances. Please order carefully!

PARTIAL APPLICATION LIST (click here if your vehicle isn't listed)

• 97-04 Buick Regal: Kit B
• 03-12 Cadillac CTS, CTS-V: Kit A
• 2002 Cadillac Escalade: Kit B
• 03-06 Cadillac Escalade: Kit E
• 03-07 Chevy Avalanche incl 2500: Kit E
• 98-02 Chevy Camaro: Kit B
• 10-12 Chevy Camaro: Kit A
• 01-04 Chevy Cavalier: Kit E
• 05-10 Chevy Cobalt: Kit E
• 05-12 Chevy Corvette C6 all models: Kit A (NOTE: very difficult installation)
• 11-12 Chevy Cruze: Kit F
• 06-11 Chevy HHR all models: Kit A
• 00-05 Chevy Impala: Kit E
• 06-14 Chevy Impala with 7000 RPM tach: Kit A
• 95-02 Chevy Suburban and Tahoe: Kit B
• 03-07 Chevy Suburban and Tahoe: Kit E
• 07-14 Chevy Suburban and Tahoe: Kit F
• 05-13 Ford Mustang all models: Kit A
• 98-02 Pontiac Firebird: Kit B
• 07-09 Pontiac G5: Kit E
• 08-09 Pontiac G8: Kit A
• 99-05 Pontiac Grand Am: Kit C
• 97-03 Pontiac Grand Prix: Kit B
• 04-08 Pontiac Grand Prix: Kit A
• 04-06 Pontiac GTO: Kit A
• 06-09 Pontiac Solstice: Kit E
• 07-09 Saturn Sky: Kit E